Pet Preform Injection Molding Machine 268t Hi-P268

Model NO.: HI-P268 Structure: Horizontal Plasticizing Way: Screw Type Automation: Automatic Certification: CE, ISO9001:2008 Screw Dia.: 70mm Shot Weight: 1166g Trademark: HISSON Specification: ISO9001:2000, CE HS Code: 8477101090 Type: Injection Blow Molding Plastic Type: Thermoplastic Clamping Way: Hydraulic & Mechanical Computerized: Computerized Clamping Force: 2680kn Screw L/D: 25:1 Tie Bar Distance: 570*570mm Transport Package: Nude packing Origin: Zhejiang, China (Mainland) Horizontal Fully Automatic PET preform injection molding machine
Quick Detail:

HI-P268 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 268tons, real shot weight 1100g.

Machine main components adopt world famous brand, e.g.:
Controller:TECHMATION (TAIWAN),
Low voltage contactor: SCHNEIDER(FRANCE),
Low voltage air switch: SCHNEIDER(FRANCE),
Proportional Valve: Dofluid HNC(TAIWAN)
Oil pump: VICKERS(USA)
Directional Valve: VICKERS(USA)
Induction travel switch: OMORON (JAPAN)
Inductor potentiometer: FORT(USA)

Description:

HI-P268 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 18g-600g, neck size 15mm to 120mm.

HI-P268 PET Preform injection molding machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.

Applications:

Available mold cavities on HI-P268 PET Preform Injection molding machine:

For PET perform 18g-20g, 15mm-20mm, mold cavity can be:  8-Cavities, 12-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,

For PET perform 16g-48g, 28mm PCO, 25mm/30mm, 38mm, mold cavity can be:: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,

For PET perform 50g-500g, 45mm oil neck, 60mm-120mm wide mouth, mold cavity can be:: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities,

Specifications:

HI-P268			Parameters (Special design for PET)
TECHNICAL PARAMETER TABLE		Unit
INJECTION UNIT	SCREW DIAMETER	mm	70
	SCREW L/D RATIO	L/D	25
	SHOT VOLUME(THEORETICAL)	cm3	1100
	INJECTION WEIGHT(PET)	g	1166
	INJECTION PRESSURE	Mpa	147
	INJECTION RATE	g/s	380
	PLASTICIZING CAPACITY	g/s	60
	SCREW SPEED	rpm	0-190
CLAMPING UNIT	CLAMP FORCE	Kn	2680
	OPEN STROKE	mm	550
	MAX.MOULD HEIGHT	mm	600
	MIN.MOULD HEIGHT	mm	230
	SPACE BETWEEN TIE BARS	mm	570×570 (W×H)
	EJECTOR FORCE	Kn	65
	EJECTOR STROKE	mm	150
GENEREL	EJECTOR NUMBER	n	9
	PUMP PRESSURE	Mpa	16
	PUMP MOTOR POWER	KW	30
	HEATING POWER	KW	21.5
	MACHINE DIMENSION	m	6.1×1.5×2.2(L×W×H)
	MACHINE WEIGHT	T	8.0
	Hopper Capacity	L	50
	Oil Tank Capacity	L	580

Contact us if you need more details on Preform Injection Molding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about preform injection machine、Pet Preform Injection. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PET preform injection molding machine