200gram Injection Molding Machine

Model NO.: LSF128 Structure: Horizontal Automation: Automatic Voltage: OEM Specification: ISO9001 HS Code: 84771010 Type: Tube Head Injection Plastic Type: Thermoplastic Computerized: Computerized Trademark: LONGSHUN Origin: China 200gram Injection Molding Machine

Company Profile:
We are a Chinese professional injection molding machine manufacturer & exporter, providing four types of Injection Machine with clamping force ranging from 600KN to 32000KN and injection weight from 68g to 40570g. With more than 20 years experience, we can produce low energy consumption and high efficient machine.








Advantages:
A) Energy saving: Save 30% to 60% compared to ordinary machine.
B) Easy operating: Parameters settings, system speed adjusting is simple digit function, operate on the control interface like on the ordinary machine.
C) High performance: High response (30ms-130ms), high stability, repetition.
D) Fast response: Energy saving, high precision and lower defectives and waste.
E) Spare parts: Come from Japan, Germany, Italy etc.
F) High precision: Correct the result to 2 decimal places.
G) Visual lubricating system: Protective machinery parts without abrasion and broken.
 
Important features:
A) Clamping Unit:
Five points double toggle mould clamping mechanism is featured with fast opening & clamping, stable & energy saving.
Reliable low pressure protection function greatly prolongs the service life of the mould.
Mechanical & double electric interlock protection devices guarantee the safety of the operators.

B) Injection Unit:
Infection platform is fixed by double axis pin plus flat key so that it is stable.
Double cylinder balance infection molten material mechanism provides high-pressure injection of molten material & safe space.

C) Features of hydraulic system:
Perfect combination between computer & high efficient proportional plunger variable pump saves electricity by 25%-50%.

D) Controller:
Six stages material injection speeds & pressure, three stages pressure holding speed & pressure, and two stages material molten speed & pressure control can meet all complicated process requirement of products.
Fuzzy temperature control is used. High & low temperature deviation alarm & thermocouple disconnection inspection functions are available. 
 

Service:
A) Before sales service:
Our sales and technical team can provide the Plastic Mould design and relevant parameter suggestions to help them decide the most suitable machine
.
B) During sales service:
We help customer to make the workshop display, such as electricity line and cooling water installation and provide free operating training.

C) After sales service:
Our engineers will help customer to install and debug the plastic molding machine. During the 1 year guarantee time, we offer all the damaged parts free of charge.


Different models have different technical requirements and also applied to different products. Welcome to contact us for more details and professional services.

INJECTION UNIT		Unit	LSF-128
			A	B	C
	Screw Diameter	Mm	38	40	45
	Screw L/D Ratio	L/D	22.1	21	18.7
	Short Size	Cm3	209	232	294
	Injection weight	G	191	211	267
	Injection Rate	g/s	105	132	160
	Plasticizing capacity	g/s	16	20	28
	Injection Pressure	Mpa	205	185	147
	Screw Speed	Rpm	0-200
CLAMPING UNIT	Clamp Force	KN	1280
	Space Between Tie Bars	mm	410*380
	Toggle Stroke	mm	380
	Max. Mold Height	mm	430
	Min. Mold Height	mm	150
	Ejector Stroke	mm	130
	Ejector Tonnage	KN	39.6
	Ejector Number	P	5
OTHERS	Max. pump Pressure	Mpa	16
	Pump motor powder	Kw	13
	Heater Power	Kw	7.4
	Machine Dimension(L*W*H)	M	4.5*1.19*1.85
	Machine Weight	T	4.2

 

Contact us if you need more details on 200gram Injection Moulding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 200gram Injection Machine、200gram Plastic Injection Machinery. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : standard injection moulding machine