30% Carbon Black Masterbatch
Basic Info
Model No.: 7066
Product Description
Description
ANDA black masterbatches have a in-dependent Quality Control Department, a complete and advanced quality testing series have been built and well reserved. More than 30 testing equipments have been set, including RoHS tester, black tester, color light box, Injection Machine and blowing machine, etc.
The 30 % Carbon Black Black Masterbatch 7066 is one middle grade concentration black masterbatch, made with recycle PE carrier and high tint power carbon black (ZY-2) and super fine CaCO3, polished by PE wax, have shiny surface and finish, the MFI is as high 16 gram/10 mintues 21.6kg &190 Cdegree. The 30% Carbon Black black masterbatch 7066 is one universal using products, and could be used for most thermal plastic hard resin production. The 30% Carbon Black Black Masterbatch is suitable for use in common injection, granulation, pressure sheet,extrution pipe. The 30% Carbon Black Masterbatch does not have any odor smell, compatiable with ABS, PC, PS, Nylon, PPM, PPS.
Composition
Carbon Black Content=30%±1%
Carrier=Recycle LDPE
Carbon Black = ZY-2
Calcium Carbonate= 800mesh
Compatiable Applications
The 30% Carbon Black Black Mastebatch 7066 is compatible with ABS, PC, PS, Nylon, PPM, PPS. materials.
Method of Usage
The 30% Carbon Black Black Masterbatch 7066 has good dispersion ability and is therefore suitable for direct addition and mixing with plastic resins in mixer,avoiding pollution and mal-scattering problems caused by pigment.
Recommended Dosage
1-3% subjected to the final products requirements.
Physical Properties
Density(24℃) : 1,550kg/m3
Melting Flow Index : 16g/10min(21.6kg/190℃)
Moisture Content : <0.15%
Packaging And Storage
The 30% Carbon Black Black Masterbatch 7066 is supplied in pellet form and packed in 25kg plastic or paper bags.It should be stored in a dry place.
Product Categories : Black Masterbatch > Economical Injection Masterbatches