environmental protection variable injection moulding machine
Basic Info
Model No.: IJT-H330
Product Description
1,high-quality imported parts.
2,water and power saving.
3,high value performance.
4, oil saving.
specificaton INJECT Variable Injection Moulding Machine ♦The machine use the a high response proportional variable-capacity system, make RMS of the hydraulic system match to the machine running energy, avoid throttling and loss of overflow energy tremendously, decrease the machine Calorific value, and save the electricity from 30%~60% compared with the common standard machine, the economic efficiency will be more obvious, which could provide our customers with broad room to choose.
IJT-H380 | ||||
Injection Unit | ||||
Screw Diameter | mm | 65 | 70 | 75 |
Screw L/D Ratio | L/D | 21.5 | 20 | 18.6 |
Shot Volume | cm³ | 1184 | 1374 | 1577 |
Injection Weight(PS) | g | 1078 | 1250 | 1435 |
Injection Pressure | Mpa | 208 | 180 | 156 |
Injection Rate | cm³/s | 313 | 361 | 414 |
Plasticizing Capacity | g/s | 54.6 | 66.7 | 80.4 |
Screw Speed | rpm | 0-185 | ||
Clamping Unit | ||||
Clamping Tonnage | KN | 3800 | ||
Toggle Stroke | mm | 670 | ||
Space Between Tie-bars | mm | 730x710 | ||
Max. Mold Height | mm | 720 | ||
Min. Mold Height | mm | 250 | ||
Ejector Stroke | mm | 160 | ||
Ejector Tonnage | KN | 110 | ||
Ejector Number | Piece | 13 | ||
Others | ||||
Max. Pump Pressure | Mpa | 16 | ||
Motor Power | KW | 37 | ||
Heater Power | KW | 23 | ||
Machine Dimension | m | 7.1x1.8x2.5 | ||
Machine Weight | ton | 15.5 | ||
Oil Tank Capacity | L | 900 |
Product Categories : Variable Pump Injection Molding Machine
Premium Related Products